Technical data

8.5.2008 Rev. 2.2
Safety instructions
4
2.2.3 Start/stop button (5.5)
The coffee making process can be interrupted at any point using the Start/stop button lo-
cated on the control panel.
2.2.4 Jug detector (9)
This appliance is fitted with a jug detector that operates the leak stop under the filter. This
jug detector also ensures that the appliance only makes coffee if there is a jug under the
filter. If the jug is removed during the coffee brewing process, the process will be inter-
rupted and the leak stop in the filter will prevent coffee dripping on the hot plate.
2.2.5 Overflow safeguard
The amount of water required is regulated and monitored by flow and level sensors. If one
of the two sensors detects an irregularity, the appliance switches off and both indicator
lights will flicker.
2.3 Appliances and the environment
2.3.1 The packing material
Your new coffee maker has been carefully packaged to protect it against damage.
The packing is not harmful to the environment and consists of the following materials:
• corrugated cardboard
• filler elements made of polyurethane foam <PUR> covered with a polythene film
(>PE-HD<). The waste processing plant in your municipality will be pleased to in-
form you about where you can dispose of the materials.
2.3.2 Discarding the appliance
No appliance lasts forever. When the time comes to discard your appliance it will usually
be possible to return it to your dealer. If this is not the case, ask your municipal council
about the alternatives for recycling the materials. All plastic parts have been given stand-
ard codes. The parts of the appliance such as the printed circuit board and accompanying
parts form electrical and electronic waste. The metal body is made of stainless steel and
can be completely dismantled.