Tus neeg siv phau ntawv

Table Of Contents

pag. 13

71504165-0-005

7 LIST OF ALARMS

1 THE FOLLOWING OPERATIONS SHOULD BE PERFORMED EXCLUSIVELY BY QUALIFIED AND

AUTHORISED PERSONNEL.

I IN CASE OF INCORRECT OPERATION, IT IS RECOMMENDED TO DISCONNECT THE MACHINE

FROM THE ELECTRICAL AND HYDRAULIC SUPPLY NETWORK.

The illuminated button has a combination of white and red colours, which indicate the operating or alarm status,

which are summarised below:

Signal / Alarm RED WHITE

(AL01) Alarm: cold cycle too long 1 x 0.5" 1 x 3.0"

(AL02) Alarm: cold cycles duration di󰀨erence 2 x 0.5" 1 x 3.0"

(AL03) Alarm: no water (if sensor present) 1 x 3.0" 1 x 0.5"

(AL04) Alarm: ice bin probe faulty 3 x 0.5" 1 x 3.0"

(AL05) Routine maintenance request ON 3" ON 3"

(AL06) High temperature at condenser outlet ON OFF

(AL07) Condenser probe alarm 4 x 0.5" 1 x 3.0"

(AL08) Evaporator probe (if present) 5 x 0.5" 1 x 3.0"

(AL09) Blackout - No power supply OFF x 1.0" 1 x 5.0"

(AL10) High pressure alarm ON OFF

(AL11) Discharge pump alarm 1 x 0.5" 1 x 0.5"

(AL14) Condenser cleaning 7 x 0.5" 1 x 3.0"

(AL15) Probe reversal 5 x 0.5" 2 x 0.5"

(AL17) Evaporator High T. 1 x 3.0" 2 x 0.5"

Download HACCP data and update SW 3 ash 3 ash

Machine start-up phase OFF 2Hz ash

Ice production phase OFF ON

Full bin OFF 10s ash

Standby OFF 30s ash

Ozone cycle phase OFF ON 1"

Gas lling phase (service) ON 1" ON 1"

OFF : LED / colour always OFF

ON : LED / colour always ON

ashing : LED / colour ON for 0.5s, OFF for 0.5s

•