User's Manual

17. Buzzer: The alarm function of all weather data can be set independently. Users can set the
upper/lower limit within the range of design parameters.
18. Local data storage: Can store meteorological data for up to 1 year. Can connect with PC via USB
and use our company's supporting software （SmartWeather ） Data access.
19. Cloud data storage: Can store weather data up to 3 years, and will be announced on the
company website after opening.(now not yet open)
20. The LCD of the receiver is shown as follows. After the user loads the battery, all ICONS will be
displayed for two seconds before the receiver enters normal operation.
23. Indoor and outdoor connection: First install the batteries, outdoor transmitter and indoor
receiver battery, the sensor signal, the outdoor transmitter began to search in the search
process, the signal icon will always shine, search to the outdoor icon after static data, such as: 3
minutes after a failed search icon disappear,( disappear after touching any host keys, continue to
open search pattern), to ensure the effective distance of 100 meters open place, in the process of
search, please don't to make any operating the indoor receiver.
24. Key operation
1) In power-on MODE, press MODE button for 3s seconds to enter the key setting MODE. At this
time, the screen time data flashes, indicating that the key setting MODE has been entered.
2) In the key cycle setting MODE, press the MODE key for function cycle setting, such as: switching
time MODE, date setting MODE, temperature settingMODE, air pressure settingMODE, etc.
3) In the cyclic setting mode, press NEXT to set different digits in this mode, such as switching
from hour to minute. When setting relevant parameters, the data flashes, and you can press +/-
to set the data to increase or decrease.
4) In temperature setting mode, press NEXT to switch between units, alarm, upper and lower
limits, etc., and press +/- to increase and decrease data, and to turn alarm on and off, etc. (note:
when setting alarm, press SET to turn alarm on and off.)
5) Historical data search: Press SET/HISTORY button for 3 seconds, and when the cache icon on the
product flashes, press +/- to browse the data, and 48 pieces of data are stored on a normal day.
For example: Only turn on the machine for 1 hour to browse the data for 2 pieces data, start to
turn on a day, and so on.
6) After setting related parameters, long press MODE key above 3s to exit the setting MODE, or
wait for more than 2 minutes, and the product will automatically exit the setting MODE.
二、PC software operation
PC data download software link site：http://app.meteorologyhk.com:8080/pcsoft/
Click after downloading the software successfully After running the
program, jump out of the following operation interface.The diagram below: