Installation Manual

A1-MT100

After MT100 and MT500 devices are installed normally, users can download the "Laboratory Monitoring

System" APP to view the temperature data tested; or view the temperature data through the computer web

version.

4 Installation Instructions

4.1 Installation Method

1. Unscrew the top cover of the equipment, and remove the insulating strip on the top of the

button battery;

2. Tighten the top cover of the equipment, sterilize it, and put it into the incubator to be

tested;

4.2 Installation Precautions

Installation Precautions

Note that SN is located on the antenna. If the wireless signal of the device is weak

and data is often lost, try to place the antenna outward, namely, keep the side with

engraved SN outward to prevent the surrounding metal objects from affecting the

Dish tray