Installation Guide

B1-MT400

1 Overview

1.1 Operation Instructions of Manual

1.1.1 It is not allowed to print or disclose any content of this Manual, including pictures and audio

products, under any name without the consent of Huchuang Union;

1.1.2 The equipment operator may copy some sections of this Operation Manual for internal use only,

such as for instructing the user how to deal with emergencies. These sections are clearly listed in

the catalogue of this manual;

1.1.3 Wuhan Huchuang Union Technology Co., Ltd. reserves the copyright of the Manual. The manual

contains the information protected by copyright laws. No part of the Manual is allowed to be

copied and sent to the users without the prior written permission of the copyright holder;

1.1.4 The contents of the Manual are subject to change without prior notice.

1.2 Overview

MT400 is powered through the power adapter. The 1000mAh lithium battery built in the device

can only provide the power supply to the device for a short time when being disconnected from the

adapter, so the device cannot work under the condition of disconnection from the adapter for a long time;

in addition, the equipment has power failure alarm function.

MT400 environment monitoring main unit is mainly used for laboratory environment monitoring,

and the OLED display screen of MT400 displays temperature, humidity, air pressure, PM2.5, PM10, O2,

CO2, VOC and HCHO values in real time.

MT400 data upload frequency (default 3 minutes): It uploads the sampled data once every 3

minutes through the wireless transmission function.

1.3 Environmental Requirements

1.3.1 Only for indoor use, no high temperature, moisture, water or dust;

1.3.2 Atmospheric pressure: 70kPa～105kPa; Working ambient temperature: 0℃～+50℃;

1.3.3 Storage ambient temperature: -20℃～+50℃; relative humidity in the working environment: ≤80%

(non-condensing);