Installation Guide

B1-MT400
12
3.7.2 "1.SET DATE TIME"
Note: This option is used for setting the current operating date and time of the equipment;
Select "1.SET DATE TIME" on the setting menu, and then press the "OK" button (Key 3) to enter
the setting interface. As shown in the following figure:
Parameter Description:
“YY/MM/DD”
Set date (year, month, day);
“hh: mm: ss”
Set time (hour: minute: second);
Operation Instructions of Buttons:
Key 1- "+" key: Press this button to add the current set value by 1;
Key 2- "-" key: Press this button to reduce the current set value by 1;
Key 3- ">>" key: When you press the button, the cursor will move to the next set value;
Key 4- "OK" key: When you press the button, the system will automatically save parameters and return to
the setting interface.