Installation Guide

B1-MT400
11
below:
Display Instructions:
"Model" in Row 1
Equipment model;
"SN" in Row 2
Unique serial number of equipment;
Row 6 and 7: Version
Software/ hardware version of equipment;
Operation Instructions of Buttons:
Key 1: The system returns to the main interface when the key is pressed;
Key 2: The system returns to the main interface when the key is pressed;
Key 3: The system returns to the main interface when the key is pressed;
Key 4: The system returns to the main interface when the key is pressed;
3.7 Parameter Setting
3.7.1 Enter setting interface
After the equipment is normally started up and enters the main interface, you can press the "MENU"
button (Key 4) on the main interface to enter the "Setting interface" which include 6 items. As shown in
the following figure: