Installation Manual

A1-MT200LM
3
1 Overview
1.1 Operation Instructions of Manual
1.1.1 It is not allowed to print or disclose any content of this Manual, including pictures and audio
products, under any name without the consent of Huchuang Union;
1.1.2 The equipment operator may copy some sections of this Operation Manual for internal use only,
such as for instructing the user how to deal with emergencies. These sections are clearly listed in
the catalogue of this manual;
1.1.3 Wuhan Huchuang Union Technology Co., Ltd. reserves the copyright of the Manual. The manual
contains the information protected by copyright laws. No part of the Manual is allowed to be
copied and sent to the users without the prior written permission of the copyright holder;
1.1.4 The contents of the Manual are subject to change without prior notice.
1.2 Overview
MT200LM device is mainly used for the management of liquid nitrogen tank under experimental
monitoring, adding fingerprint verification function to facilitate the warehousing and delivery
management of the samples in the liquid nitrogen tank; and integrating liquid nitrogen level monitoring
function to achieve low level alarm; equipped with two external temperature sensors: one sensor is used
to detect tank wall temperature, and the other is used to detect room temperature; it will give liquid
nitrogen leakage alarm (optional) according to the temperature difference.
1.3 Environmental Requirements
1.3.1 Only for indoor use, no high temperature, moisture, water or dust;