Installation Manual

A1-MT200LM

3) Status Area Instructions of Liquid Nitrogen Tank

Detailed diagram of the

status area of liquid nitrogen

tank is shown in the main

interface.

Remarks:

a) Display the tank name which can be defined by user;

b) The SN of the intelligent lock installed on the tank;

c) Display the liquid nitrogen temperature detected by the temperature sensor (the temperature

measurement range of the temperature sensor is from -200 ℃ to +40 ℃; if no sensor is

connected, no sensor is displayed; if the temperature is higher than -190℃, a red message is

displayed. The default data upload frequency is 3 minutes per time). In addition, double-click

here, you can immediately query the current temperature of the device;

d) Display the battery level of the intelligent lock installed on the tank (the data upload frequency

and the temperature are consistent);

e) Display the switch status of the intelligent lock installed on the tank.

f) If N100LM normal temperature probe is equipped, the temperature difference will be displayed

here;

Lock

Unlock

Lock

Unlock

Lock

Unlock