Installation Manual

A3-MT300

1 Overview

1.1 Operation Instructions of Manual

1.1.1 It is not allowed to print or disclose any content of this Manual, including pictures and audio

products, under any name without the consent of Huchuang Union;

1.1.2 The equipment operator may copy some sections of this Operation Manual for internal use only,

such as for instructing the user how to deal with emergencies. These sections are clearly listed in

the catalogue of this manual;

1.1.3 Wuhan Huchuang Union Technology Co., Ltd. reserves the copyright of the Manual. The manual

contains the information protected by copyright laws. No part of the Manual is allowed to be

copied and sent to the users without the prior written permission of the copyright holder;

1.1.4 The contents of the Manual are subject to change without prior notice.

1.2 Overview

MT300 works with MT300SP to monitor the incubator temperature, the concentrations of CO

and O

and

humidity in the lab, displays the current sampling values in real time on the display screen and upload the

sampled data through wireless transmission at the specified interval (3 minutes by default).

1.3 Environmental Requirements

1.3.1 Only for indoor use, no high temperature, moisture, water or dust;

1.3.2 Atmospheric pressure: 70kPa～105kPa;

1.3.3 Working ambient temperature: 0℃～+50℃; storage ambient temperature: 0℃～+50℃;

1.3.4 Relative humidity of MT300 in the working environment: ≤ 80% (non-condensing); working

ambient temperature of MT300SP: -20℃～+50℃;

1.3.5 Power adapter (input: AC100V ~ 240V, 50/60Hz; output: 5V, 2.1A, 10.5W);

1.4 Environmental Protection Instructions

1.4.1 MT300 device contains reusable materials, and its components can be recycled after being cleaned

and sterilized.

1.4.2 During recycling and handling MT300 device, it is recommended that the company's technical

personnel dismantle it and recycle it according to different waste groups;