Installation Manual

B1-MT300MIX
7
Sensor
O
2
sensor, CO
2
sensor
Detection resolution of
O
2
concentration
0.01%
Detection accuracy of
O
2
concentration
±0.2%
Detection range of O
2
concentration
0%~30%
Detection resolution of
CO
2
concentration
0.01%
Detection accuracy of
CO
2
concentration
±0.2%
Detection range of CO
2
concentration
0%~10%
Power failure alarm
Audible and visual alarm
Battery
1000mAh, providing the power supply for more than 2 hours after
power failure in fully charged state
Display screen
2.23 inches
Data refresh frequency
of display screen
1 second/ time
Equipment status upload
frequency
3 min/time (modifiable) by default
Concentration sampling
frequency
55 min/time (modifiable) by default
Intake time of single
sampling
10 seconds (modifiable) by default
Range of external input
gas pressure
0.08MPa - 0.2MPa
Power supply mode
DC5V/2A power adapter
Maximum power
consumption
0.4A @DC5V
Average power
consumption
0.15A @DC5V
Storage temperature
-20℃～+50℃
Operating temperature
+15℃～+30℃
Humidity
≤80% (Non-condensing)
3 Basic Operation Instructions
3.1 Power-On for Use
Connect the external 5V adapter and turn the power toggle switch to "ON" position, at the moment, the
display screen will be on, and the buzzer will give a short beep, indicating that the system starts normally.
After MT300MIX and MT500 devices are installed normally, users can download the "Laboratory
Monitoring System" APP to view the monitored temperature data; or view the temperature data through the
computer web version.