Installation Manual

B1-MT300MIX

c) Power Interface

Equipped with a 5V/2A power adapter.

d) Antenna

e) Gas Outlet

Refers to the gas outlet of the device. After the solenoid valve of the device is opened for the intake

detection, excess gas will be discharged through the outlet. Do not block the gas outlet.

f) Upgrade Debugging Port

Micro USB interface; it has 2 functions: Firstly, it can be used for program upgrade: The

special serial cable customized by the company is used for upgrading program instead of

Micro USB cable; secondly, it is used to modify parameters: The special serial cable

customized by the company shall be used for modifying parameters instead of Micro USB

cable; it needs to work with the modification software of " Huchuang Union Wireless Slaver

Debugging Platform.exe".

g) Reset Button (Pin-socket type)

Refers to the emergency reset hole of the device; the whole system can be reset through the

ejector pin here when the equipment breaks down.