Instructions / Assembly

TECHNICAL SPECIFICATIONS

Operating Pressure:

Min. 35 kPa/5 psi, Max. 500 kPa/72 psi.

Operating Temperature:

Maximum mixed temperature 70°C/158°F.

KIRI SLIDE/RAIL/BAR SHOWER AND HANDSET

INSTALLATION GUIDE

Methven warrants this product against manufacturing defects and that it is suitable for use under the

operating conditions speciﬁed in this instruction sheet.

For your warranty please refer to www.methven.com or call Customer Service

New Zealand

0800 804 222

Australia

1300 638 483

USA

1800 975 5409

0800 195 1602

Issue A

PAGE 1
KIRI SLIDE/RAIL/BAR SHOWER AND HANDSET INSTALLATION GUIDE TECHNICAL SPECIFICATIONS Operating Pressure: Min. 35 kPa/5 psi, Max. 500 kPa/72 psi. Operating Temperature: Maximum mixed temperature 70°C/158°F. Methven warrants this product against manufacturing defects and that it is suitable for use under the operating conditions specified in this instruction sheet. For your warranty please refer to www.methven.
PAGE 2
NOTE FOR HANDSET ONLY INSTALLATIONS - use step 5 only. 1. 2. Top Bracket 3. 4. Ensure that the rail is vertical. Insert the remaining screws. Fit the end caps. Slider Rail Soap Dish Bottom Bracket Locate the bottom bracket in the desired position and attach with one screw. Attach the slider and the soap dish to the rail in the desired orientation. Fit the rail to the bottom bracket. Fit the top bracket to the rail. 5. 6.