User's Manual

PRELIMINARY FCC ID: BIB61201001 INTALLATION 3-11
PRELIMINARY MCC-6120 SDR Packet Data Radio Network
3.2.2.6 Ethernet/USB Connector
The SDR has two Ethernet Network two independent Interface Adaptors and two USB adaptors.
Connections to these adaptors are made thru a 15 pin sub miniature D connector located on the
front panel. An interface cable (provided by MCC) is used to break these connections into
standard RJ 45 plugs for the Ethernet signals and a standard USB Host connector for the USB
Host, and a standard USB Device connector for the second USB port. The Host port is used to
plug memory sticks and camera devices into. The second USB port allows the SDR to operate as
a USB Host, so it can be used to connect a laptop into for purposes of programming the radio.
Ethernet-USB Connectors