Operating Manual

PRELIMINARY FCC ID: BIB61201001 INTALLATION 3-8
PRELIMINARY MCC-6120 SDR Packet Data Radio Network
3.2.2.5.1 Operator Port
The Operator Port is normally connected to a local operator terminal. Use a standard RS-232
cable with a 9-pin male D connector.
OPERATOR PORT – 9S
Pin Signal
1 CD
2 Tx Data
3 Rx Data
4 DTR
5 Ground
6 DSR
7 RTS
8 CTS
9 Not Used
3.2.2.5.2 Data Port
The Data Port may be used for connecting to a data logger, GPS receiver or other serial input
device. Use a standard RS-232 cable with a 9-pin male D connector.
DATA PORT – 9S
Pin Signal
1 Not Used
2 Tx Data
3 Rx Data
4 DTR
5 Ground
6 DSR
7 RTS
8 CTS
9 Ring