Operations Manual

OPERATIONS 4-46
O&M of the MCC-545B PACKET DATA RADIO
12/2000
CR10X,SIGNATURE
Read and Display Current CR10X program signature.
The Signature is a checksum of program bytes.
Signature =
checksum
0 - FF (hex)
CR10X,STAT
Read and display CR10X internal pointers and error
statistics.
†CR10X,TIME,source Specify source of data report group timestamp. source =
545B – 545B
assigns
timestamp
CR10X –
CR10X assigns
timestamp; 545B
gets timestamp
from second and
third sensors
DATE{,mm/dd/yy} Set system date. If no parameters are given, show
current date. If parameters are given, DOS calendar will
also be updated.
mm = month
dd = day
yy = year
1 – 12
1 – 31
0 – 99
DEL MSG,nnnn:sss Delete specified message. nnnn = Station ID
Master = 1 – 245
Remote = 256 –
4095
sss = message
serial #
1 – 4095
1 – 255
*DESTINATION{,nnnn...
.}
Set default message/data destination(s). Enter 0 to use
source routing at the Master Station. If you turn off the
545B’s default destination, no data will be queued, and
the message editor will ask you to enter a destination
before sending a message. Up to four destinations may
be specified.
nnnn = OFF, 0 or
Station ID:
Master = 1 –
245
Remote = 256 –
4095
0 – 4095
*DEVICE{,type} Select device type mode of operation (i.e., the 545B acts
as a Remote or a limited Master Station).
type =
REMOTE
MASTER