User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 85
Messaging Options and Commands
Various options may be set up in the MCC-545C using the command DIRECT
with the parameters shown in the following list. Each command is briefly
described below:
Command List:
DIRECT
DIRECT, p, CONNECT STRING, OFF
DIRECT, p, CONNECT STRING, ANY
DIRECT, p, CONNECT STRING, connect-text-string
DIRECT, p, CONNECT RESPONSE, OFF
DIRECT, p, CONNECT RESPONSE, response-text-string
DIRECT, p, PACKET TIMEOUT, decimal-timeout-ticks
DIRECT, p, PACKET TERMINATOR, OFF
DIRECT, p, PACKET TERMINATOR, decimal-char-code
DIRECT, p, MAX PACKET, length
DIRECT, p, ETE, ON
DIRECT, p, ETE, OFF
Command Detailed Descriptions:
DIRECT
When used without any parameters the current port settings will be
displayed