User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 71
If the Total parameter was entered, the canned message mode stops when
the desired number of messages has been transmitted.
To enter an edited canned message, enter:
CANMSG,id
where “id” is the neighboring station’s ID. After composing your message
press the [ESC] key. The MCC-545C automatically routes up to 25 copies of
the canned message to the destination station.
Each canned message is acknowledged by the selected neighboring station.
No end-to-end acknowledgements are received for canned messages.
To manually terminate the mode, enter:
CANMSG OFF,id
Canned messages are normally not printed at the destination station. To
print canned messages as they are received, enter:
CANMSG MODE,PRINT
To turn off the print mode, enter:
CANMSG MODE,NO PRINT
5.3.6 Receiving Messages
When a new message is received, it is announced by the following display:
hh:mm:ss RECEIVING name:sss TXT sss/nn FROM name ROUTED TO: name
The MCC-545C then generates an acknowledgement of the message packet
and transmits the ACK to the neighbor from whom the message was
received:
hh:mm:ss TXTMSG ACK name:sss, nnnn CHARS FROM name
When the destination MCC-545C receives a complete message, it displays
the following message:
hh:mm:ss MSG RECEIVED name:sss, xxxx CHARS
text..................
**end-of-message**