User's Manual

545C Operations Manual
02/10/2012
46
© 2012 Meteorcomm LLC.
Mode Description
FIXED
Connectivity will be fixed to the
unit can communicate with only one Master Station at a time
the
standard mode for networks with a single Master Station.
MULTI
In this mode the unit can connect to multiple Master Stations
standard mode for Meteor Burst networks with more than one Master
Station.
The format for this mode is:
ID,nnnnn,1,M
ULTI,INIT
You can also change just the mode for the ID by typing:
ID,aaaaa
Customer ID
The MCC-
545C may also be assigned a unique customer ID number that can
correspond to a customer
number, or other
identifier as needed.
Factory Default Parameters
When you type FACTORY,DEFAULT,INIT, the unit restores the factory
default parameters. Refer to Appendix B for more details regarding the
factory default parameters.
Note:
If the ID and the CONFIG are not
FACTORY,DEFAULT,INIT, the unit’s ID will remain the same, but the ID mode
will be set to be the fixed mode . The frequency synthesizer will get
unlocked (Both TX and RX frequencies will be set to 99.99 MHz.). In this
case, you need to
set your frequencies again, in addition to other
parameters, using the script file (refer to Section 4.2.7).
5.1.5
System Time and Date
The MCC-
545C has its own internal clock
its clock to the nearest second either with its ass
own internal GPS receiver (if available)
TIMESYNC,source
Prerelease
DCN
© 2012 Meteorcomm LLC.
All Rights Reserved. Proprietary and Confidential. Do Not Distribute.
Connectivity will be fixed to the
mmmm
Master Station
.
In this mode the
unit can communicate with only one Master Station at a time
standard mode for networks with a single Master Station.
In this mode the unit can connect to multiple Master Stations
standard mode for Meteor Burst networks with more than one Master
The format for this mode is:
ULTI,INIT
You can also change just the mode for the ID by typing:
545C may also be assigned a unique customer ID number that can
correspond to a customer
-
specific network or system ID, an asset tracking
identifier as needed.
When you type FACTORY,DEFAULT,INIT, the unit restores the factory
default parameters. Refer to Appendix B for more details regarding the
factory default parameters.
If the ID and the CONFIG are not
LOCKED before typing
FACTORY,DEFAULT,INIT, the unit’s ID will remain the same, but the ID mode
will be set to be the fixed mode . The frequency synthesizer will get
unlocked (Both TX and RX frequencies will be set to 99.99 MHz.). In this
set your frequencies again, in addition to other
parameters, using the script file (refer to Section 4.2.7).
System Time and Date
545C has its own internal clock
–
periodically it can synchronize
its clock to the nearest second either with its ass
igned Master Station or its
own internal GPS receiver (if available)
.
Enter the following command:
TIMESYNC,source
DCN
00001789-A
All Rights Reserved. Proprietary and Confidential. Do Not Distribute.
In this mode the
unit can communicate with only one Master Station at a time
. This is
standard mode for networks with a single Master Station.
In this mode the unit can connect to multiple Master Stations
.
This is the
standard mode for Meteor Burst networks with more than one Master
545C may also be assigned a unique customer ID number that can
specific network or system ID, an asset tracking
When you type FACTORY,DEFAULT,INIT, the unit restores the factory
default parameters. Refer to Appendix B for more details regarding the
FACTORY,DEFAULT,INIT, the unit’s ID will remain the same, but the ID mode
will be set to be the fixed mode . The frequency synthesizer will get
unlocked (Both TX and RX frequencies will be set to 99.99 MHz.). In this
set your frequencies again, in addition to other
periodically it can synchronize
igned Master Station or its
Enter the following command: