User's Manual

545C Operations Manual
02/10/2012
38
© 2012 Meteorcomm LLC.
Note: The MCC-
545C will not transmit if the synthesizer is not locked.
Select Site Name
A descriptive name may be given to the s
being installed.
The selected site name must be coordinated with your
System Administrator
SITE NAME, nnnnnn [ENTER]
where: nnnnnn = maximum of 32 alpha
Caution: Please
double
spacing. Data from a site with an incorrect site name will be mishandled or
misrouted by the Host. An incorrect site name can result in significant effort
to recover misrouted data.
Enter Script Files
The appropriate Script File is usually programmed into the MCC
the factory prior to shipment
not been entered, a new file can be loaded from your operator terminal
using XTermW
software
the MCC-
545C to operate as either a Base, Repeater, or Remote Station
Other Script Files define any application programs that are performed
by the station. For example, the application for a Remote Station may
be as a
mobile unit reporting position data or as a fixed site reporting
sensor data.
The procedure for loading the Script File is described below:
1.
Install the MCC
Script File on it into your operator terminal, and load t
File into your
2. Start
XTermW
and COM port (typically COM1, 9600 baud)
are defaults.
3. Type
factory,default,init
into the MCC
Prerelease
DCN
.
All Rights Reserved. Proprietary and Confidential. Do
545C will not transmit if the synthesizer is not locked.
A descriptive name may be given to the s
ite where the MCC-
545C is
The selected site name must be coordinated with your
System Administrator
.
To enter a site name use the following command:
SITE NAME, nnnnnn [ENTER]
where: nnnnnn = maximum of 32 alpha
-characters
double
-
check the site name entry for correct spelling and
spacing. Data from a site with an incorrect site name will be mishandled or
misrouted by the Host. An incorrect site name can result in significant effort
to recover misrouted data.
The appropriate Script File is usually programmed into the MCC
the factory prior to shipment
.
If the appropriate Script File has already
not been entered, a new file can be loaded from your operator terminal
software
. There is on
e Script File that uniquely programs
545C to operate as either a Base, Repeater, or Remote Station
Other Script Files define any application programs that are performed
by the station. For example, the application for a Remote Station may
mobile unit reporting position data or as a fixed site reporting
The procedure for loading the Script File is described below:
Install the MCC
-545C Meteorcomm
CD (or diskette), with the
Script File on it into your operator terminal, and load t
File into your
XTermW subdirectory.
XTermW
and open a connection at the correct baud rate
and COM port (typically COM1, 9600 baud)
.
All other parameters
are defaults.
factory,default,init
to load the default parameters
into the MCC
-545C.
DCN
00001789-A
Do Not Distribute.
545C will not transmit if the synthesizer is not locked.
545C is
The selected site name must be coordinated with your
To enter a site name use the following command:
check the site name entry for correct spelling and
spacing. Data from a site with an incorrect site name will be mishandled or
misrouted by the Host. An incorrect site name can result in significant effort
The appropriate Script File is usually programmed into the MCC
-545C at
If the appropriate Script File has already
not been entered, a new file can be loaded from your operator terminal
e Script File that uniquely programs
545C to operate as either a Base, Repeater, or Remote Station
.
Other Script Files define any application programs that are performed
by the station. For example, the application for a Remote Station may
mobile unit reporting position data or as a fixed site reporting
CD (or diskette), with the
Script File on it into your operator terminal, and load t
he Script
and open a connection at the correct baud rate
All other parameters
to load the default parameters