User's Manual

02/10/2012
© 2012 Meteorcomm LLC. All Right
FREQUENCIES [ENTER]
or
FREQ [ENTER]
This shows you the active or “primary” TX and RX frequency pair, plus
up to 9 additional frequency pairs for channels that may be
programmed at the factory.
For example, the following
+freq 05/18/04 08:53:50 Primary TX 044.58 MHz RX 044.58 MHz
Frequency Table
Channel
>00*
01
02
03
04
05
06
07
08
09
Caution:
Do not change the frequency pair unless told to do so by your
System Administrator. Changing the frequency pair can
communicating with the network.
Once the frequencies are verified, confirm that the synthesizer is “ON”
and locked by entering the following command:
SYNTHESIZER [ENTER]
or
SYNTH [ENTER]
The unit responds with:
SYNTH
,ON,LOCKED (or UNLOCKED)
If the synthesizer returns an unlocked response, ensure that the proper
frequency pair is selected.
545C Operations Manual
Prerelease
hts Reserved.
Proprietary and Confidential. Do Not Distribu
FREQUENCIES [ENTER]
FREQ [ENTER]
for short cut
This shows you the active or “primary” TX and RX frequency pair, plus
up to 9 additional frequency pairs for channels that may be
programmed at the factory.
For example, the following
table could be displayed:
+freq 05/18/04 08:53:50 Primary TX 044.58 MHz RX 044.58 MHz
Frequency Table
TX RX
044.58 MHz
044.58 MHz
045.90 MHz
044.20 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
Do not change the frequency pair unless told to do so by your
System Administrator. Changing the frequency pair can
make your unit stop
communicating with the network.
Once the frequencies are verified, confirm that the synthesizer is “ON”
and locked by entering the following command:
SYNTHESIZER [ENTER]
SYNTH [ENTER]
for short cut
The unit responds with:
,ON,LOCKED (or UNLOCKED)
If the synthesizer returns an unlocked response, ensure that the proper
frequency pair is selected.
545C Operations Manual
DCN 00001789-A
ibute.
37
This shows you the active or “primary” TX and RX frequency pair, plus
up to 9 additional frequency pairs for channels that may be
+freq 05/18/04 08:53:50 Primary TX 044.58 MHz RX 044.58 MHz
044.58 MHz
044.20 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
000.00 MHz
Do not change the frequency pair unless told to do so by your
make your unit stop
Once the frequencies are verified, confirm that the synthesizer is “ON”
If the synthesizer returns an unlocked response, ensure that the proper