User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 189
COMMAND DESCRIPTION PARAMETERS RANGE
UPDT{,function,parameters}
Send update message to data logger type device.
NOTE
: Read sensors but do
not transmit data read
TX: Read sensors and
transmit data read
TIME: Set time of 545C in
logger
TEST: Operate compo-nent
in test mode:
ALERT
FLOOD
HORN
GATE
WARNING
OUT: Set output register:
BYTE
BIT,BITNUMBER
BITS,STARTBIT, ENDBIT
ARM: Enable alarm
activation
DISARM: Disable Alarm
activation
RESET: Reset alarm
condition
POS: Schedule position
report at same time data
report sent
RM: Routine
message format
RMP: RMP
Message format
value
appropriate to
the register:
0
–
255