User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
186 © 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute.
COMMAND DESCRIPTION PARAMETERS RANGE
SWMON Monitors both the RS-232 port and RF link. This
SWMON command should be placed in the
schedule of the 545C at an interval that detects a
Master Station failure within the required
system design. There are no parameters.
A typical example is: SCHED,I,5:0,SWMON
*SYNTH{,action} Display/set status of frequency synthesizer. This
command is applicable only to the MCC-545C.
action =
ON – enable
OFF– disable
T Show current date/time.
TEST Send test transmission and return updated
statistics (uses same format as STAT command).
TIME{,hh:mm:ss} Set system time. If no parameters are specified,
show current time. If parameters are given, DOS
calendar will also be updated.
hh – hours
mm – minutes
ss – seconds
0 – 23
0 – 59
0 – 59
TIMEPROBE Show current setting
TIMEPROBE,OFF Do NOT transmit time probes