User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 179
COMMAND DESCRIPTION PARAMETERS RANGE
†SENSOR{function}
{weight}{low,high}}}
Defines the GLOF sensor data limit for
fail/dry/wet determination. Gives the “weight”
(i.e., how significant) of each case for the flood
calculation.
Function:
DRY
WET
FLOOD
FAIL
LOW 1 - 99
HIGH 1 – 9999
WEIGHT 1 - 99
SERIAL{,sss} Set next packet serial number. Parameter “sss” is
serial number of last packet transmitted.
sss = message serial number 1 – 255
SERIALNUMBER{,sn} Display/Set serial number of this modem
*SET BAUD
{,function,rate,flow}
Adjust baud rate and flow control of specified
port. When no parameters are entered, this
command displays I/O configurations.
function = user interface
function
rate = baud rate
flow = flow control
MNT, POS,
MSG, ALT, DTA,
CANDS,
110, 150, 300,
600, 1200,
2400, 4800,
9600
Y or N
SHOW REMOTES Display ID and assigned 520B of each Remote in
system.