User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
176 © 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute.
COMMAND DESCRIPTION PARAMETERS RANGE
†*ROLE{,role{,low,high}
{,mode}}
NOTE
Role is kept in CPM and low,
high and mode are kept in
BBU RAM.
Define role played in network, either SILENT
(never transmits), TRANSPOND (responds to
probes), PROBE (actively probes), or LOS (line of
sight) mode. If role is set to TRANSPOND, the
low and high parameters can be used to specify
the threshold values for automatic meteor burst
vs. line of sight modes of operation and the
mode parameter can set the starting mode
(meteor burst or line of sight).
Thresholds are specified in idle probes per
minute. To prevent LOS operation altogether,
set the low threshold to 1000 if the unit’s Master
is half duplex or 5500 if it is full duplex.
role = SILENT, LOS,
TRANSPOND or
PROBE
low = threshold for
switching from LOS to MB
mode in idle probes per
minute
high = threshold for
switching from MB to LOS
mode in idle probes per
minute
mode = MB or
LOS
0 – 32767
0 – 32767
RR,mode Remote Relay Mode. Specifies if the radio can
relay its data using another remote talking to the
base station.
Mode
= ON or OFF