User's Manual

545C Operations Manual

02/10/2012 Prerelease DCN 00001789-A

COMMAND DESCRIPTION PARAMETERS RANGE

REMOTE STAT{,nnnnn…} Display transmit/receive statistics for all Remote

Stations or for given IDs (up to 12).

nnnn = Station ID

Master = 1 – 245

Remote = 256 – 4095

1 – 4095

†REMOTE TYPE{,aaaaa} Display/set communication characteristics of the

unit. Determines how certain statistics are

reported and how remote commands/messages

are framed.

aaaaa =

COMM

DATA

PACKET

*REPEATER{,nnn} Define/display Base Station to which the

Repeater site repeats.

nnn = Base Station ID

OFF

clears a previously

established definition

1 – 245

RESET Perform hardware reset to clear and reinitialize

I/O channels and RF controller. This command

retains previous network configurations and

message traffic.

REV Display part and revision numbers of current

Link Controller and Tx/Rx Controller software.