User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 173
COMMAND DESCRIPTION PARAMETERS RANGE
†RCT{,action} Display/set remote control terminal
functionality. This functionality is applicable to
Packet protocol systems only and controls
whether the unit ignores intercepted data
reports. If enabled, intercepted reports are
ignored.
action =
ON – enable
OFF – disable
RED Without parameters, generates report of current
RED setup.
†RED,ID,nn-nnn Enables reception of remote emergency
indications from an MCC Remote Emergency
Device (RED). The entered ID code is used with
RED messages generated by the 545C using
RED,TEST or RED,TX.
nn = call sign prefix
nnn = call sign suffix
0 – 99
0 – 999
†RED,NUM,n Set dead-band interval in which repeated RED
activations do not generate another alert
message.
n = dead-band interval in
seconds
1 – 120
†RED,OFF Disable reception of remote emergency
indications from an MCC Remote Emergency
Device (RED).