User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 171
COMMAND DESCRIPTION PARAMETERS RANGE
†POLL{interval,offset,
duration,retry}{,ALWAYS}
Define/display polling schedule for
Base/Repeater Station. If ALWAYS parameter
specified, do not timeout on-line units (i.e.,
ignore retry count in this case).
interval = polling interval in
seconds
offset = offset from top of
minute
duration = length of poll
retry = retry count for failed
polls
1 – 86400
1 – 59
1 – 10
1 – 99
*POS{,interval,format,
protocol}
Display/initialize internal 545C timing for
reporting GPS position data. Specify update
period in seconds, in either binary or text
format, using given protocol.
interval = reporting interval
in seconds
format = display format
protocol = GPS unit protocol
0 – 65535
BINARY, TEXT
NMEA, ARNAV,
TAIP, TRANSAS
†POS,LOCAL{,interval} Display/initialize timing for local output of
position reports on MNT and DTA ports as well
as sending them.
interval = reporting interval
in seconds; OFF disables
local output
1 – 86400