User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 169
COMMAND DESCRIPTION PARAMETERS RANGE
†PASSWORDMODE,action,
password
Used to enable/disable use of passwords.
Default is disabled. To enable or disable the
operation with passwords, enter this command
giving the desired action along with the current
password for the unit. This will trigger an
automatic “save” operation. If set to the ON
mode, the state of the unit will be set to
“logged-off”. All operator and remote
commands except scheduled commands,
$PENTM commands, and SDATA commands will
respond with “ACCESS DENIED!”. You will not be
able to turn off the mode without first logging
on.
action =
ON
– enable
OFF
– disable
password = 3
-20 character
password
A-Z, 0-9, -
PICREV Shows PIC Software Revision number
PRE Shows status of preamble bits in the TX frame.
PRE,TOTAL BYTES,NUMBER
NULLS,BIT PATTERN
Define your own preamble pattern of 1’s and 0’s. BIT PATTERN =
1 = 01010101
2 = 00110011
PTO {1-65,000} Power down delay in seconds. The radio shuts
itself OFF after the PTO timeout.
1-65,000