User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 163
COMMAND DESCRIPTION PARAMETERS RANGE
LINKSTAT,{U}p,{B}rief
LINKSTAT,{D}own,{B}rief
LISTM{,nnnnn…} Display Remotes with burst monitor bit set (all
Remotes or given IDs up to 12).
nnnnn = Station ID
Master = 1 – 245
Remote = 256 - 4095
1 – 4095
LISTT{,nnnnn} Display Remotes with “Type” flag set (all
Remotes or given IDs up to 12)
nnnnn = Station ID
Master = 1 – 245
Remote = 256 - 4095
1 – 4095
LOCATION{,latitude,longitude
} format
Set/display the position information (latitude,
longitude). You can enter the location
information manually to calculate distance, etc
from the other radios when there is no GPS
connected physically to the radio. The radio will
not transmit the position information if there is
no GPS connected, you can use “UPDT, POS” to
transmit your location information.
Format
example>47:14.1234N,122:
16.7812W
LOCK,{ID,CONFIG} Lock the ID or CONFIG settings
When ID and CONFIG both locked, one cannot
change the following settings of the radio: ID,
FREQUENCIES, CUSTOMER ID and the SERIAL
NUMBER.