User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
162 © 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute.
COMMAND DESCRIPTION PARAMETERS RANGE
If device = Master:
*ID{,nnn{,INIT}}
Set 545C’s assigned Master Station ID to number
“nnn”. When no parameters are given, current
ID is displayed. When system is already
initialized, you must enter the INIT parameter to
change ID. INIT gives “OK” to save configuration
and reboot unit with new ID. ID changes are
automatically saved with the entire
configuration in CPM.
CAUTION
If you enter INIT, you will lose all current
message information.
nnn = assigned Master ID 1 – 245
LINKSTAT Show the complete linkstat table. The up arrow “
^” next to the unit ID denotes the current
neighbor(s). The dash “–” means that the unit(s)
is declared as neighbor down, or is being
received over the RF link.
LINKSTAT,{M}asters,
{B}rief
LINKSTAT,{R}emotes,
{B}rief