User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 153
COMMAND DESCRIPTION PARAMETERS RANGE
FREQUENCIES,xxxx,yyyy,z Select Frequencies from the Transmitter and the
Receiver
xxxx
= Transmitter Frequency
yyyy= Receiver frequency
z = Frequency Table Channel
Number
xxxx
= 40 - 50 or
43-46 MHz
yyyy= 40 – 50 or
43-46 MHz
z= 0 – 10
FREQUENCIES,z Load up Channel z from the list frequency
channels under frequency table.
z
= Frequency Table Channel
Number
z= 0 – 10
*FULL DUPLEX Set 545C in full-duplex mode.
IMPORTANT
When set to full-duplex mode, the MCC-545C’s
receiver is disabled by the built-in Tx/Rx switch.
Do not use full-duplex mode without first
consulting with your System Administrator.
NOT APPLICABLE
GATEWAY UAIS MSC port Gateway mode on,off
GENERIC show settings