User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
150 © 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute.
COMMAND DESCRIPTION PARAMETERS RANGE
FACTORY,DEFAULT,INIT
Restores the factory default parameters. Please
refer to the Factory Default Parameters defined in
Appendix B.
FEC Show current Forward Error Correction Settings
FEC,mode The system operator can enable the FEC
operation using the FEC,FIXED or the FEC,AUTO
command. The FEC,ON option will default to the
FEC,AUTO mode.The FEC,OFF command will
disable the software from transmitting FEC
frames, but it can still receive FEC frames from
other units.
Mode=
ON, OFF, FIXED,
AUTO
FEC,{ERRORS,n} max number errors to correct