User's Manual

545C Operations Manual
02/10/2012
6
© 2012 Meteorcomm LLC.
This radio
is intended for installation and use by
full knowledge of their exposure and can exercise control over their
exposure to meet FCC and IC limits. This radio device is not intended
for use by consumers or the general population.
• Table 1 i
n the RF Exposure Guide list
distances to be maintained between the general pu
operational
transmitter antenna for
applications.
•
Table 2 in the RF Exposure Guide list
distanc
es to be maintained between
transmitter antenna for two antenna types for fixed applications.
Once the authorized ERP, antenna gain and the losses from feed line,
connectors and any inline RF f
must be evaluated and if necessary,
ensure that the authorized ERP and RF exposure requirements are met.
Example ERP calculations are provided further below.
Caution:
automatically at any time when functioning as a data
radio.
beginning any service or maintenance. Remove the
antenna and connect a dummy load during testing.
2.2 RF Interference
to Residential Receivers
NOTICE TO USER: This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does not cause
harmful interference.
NOTE: This equipment has been tested and found to comply with the
lim
its for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
Prerelease
DCN
.
All Rights Reserved. Proprietary and Confidential. Do
is intended for installation and use by
employees who have
full knowledge of their exposure and can exercise control over their
exposure to meet FCC and IC limits. This radio device is not intended
for use by consumers or the general population.
n the RF Exposure Guide list
s
the calculated lateral
distances to be maintained between the general pu
blic and an
transmitter antenna for
two antenna types
fo
applications.
Table 2 in the RF Exposure Guide list
s
the calculated lateral
es to be maintained between
employees and an operational
transmitter antenna for two antenna types for fixed applications.
Once the authorized ERP, antenna gain and the losses from feed line,
connectors and any inline RF f
ilters are known, the transmitter power
must be evaluated and if necessary,
attenuated
to a value that will
ensure that the authorized ERP and RF exposure requirements are met.
Example ERP calculations are provided further below.
Caution:
Be aware that
a transmitter may operate
automatically at any time when functioning as a data
radio.
Always disable the transmitter prior to
beginning any service or maintenance. Remove the
antenna and connect a dummy load during testing.
to Residential Receivers
NOTICE TO USER: This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does not cause
harmful interference.
NOTE: This equipment has been tested and found to comply with the
its for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
DCN
00001789-A
Do Not Distribute.
employees who have
full knowledge of their exposure and can exercise control over their
exposure to meet FCC and IC limits. This radio device is not intended
the calculated lateral
blic and an
fo
r mobile
the calculated lateral
employees and an operational
transmitter antenna for two antenna types for fixed applications.
Once the authorized ERP, antenna gain and the losses from feed line,
ilters are known, the transmitter power
to a value that will
ensure that the authorized ERP and RF exposure requirements are met.
a transmitter may operate
automatically at any time when functioning as a data
Always disable the transmitter prior to
beginning any service or maintenance. Remove the
antenna and connect a dummy load during testing.
NOTICE TO USER: This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does not cause
NOTE: This equipment has been tested and found to comply with the
its for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment