User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 145
COMMAND DESCRIPTION PARAMETERS RANGE
EVENT,{IFGT,IFLT,IFEQ},BIT1,
BIT2,ACTION
Test whether a time, counter or accumulator is
greater than/less than/equal to another timer,
counter or accumulator.
IFGT= If this parameter is
greater than second
parameter.
IFLT= If this parameter is
less than second parameter.
IFEQ= If this parameter is
equal to second parameter.
Bit1= Name of a timer,
counter or accumulator to
test.
Bit2= Name of a timer,
counter or accumulator to
test Bit1 against.
Action= MCC-545C action to
be taken when event is
declared. See actions below.
EVENT,CONT,ACTION
EVENT,DO,ACTION
The CONT(Continue) event is used to define
multiple actions to an event. An event definition
command can be followed by any number of
CONT commands and are considered to be an
extension of the previous event command.