User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 141
COMMAND DESCRIPTION PARAMETERS RANGE
DLOG The DLOG command allows you to use unique
freeform commands supported by the TM8/T
data logger plus several special macro
commands. Macro commands consist of 2 or
more commands that may be dependent on the
previous command response.
DLOG,ID,nnnn Defines the id of TM8/T data logger into the
MCC-545C.
nnnn= data logger id
number
DLOG,ID Displays the id of the TM8/T data logger.
DLOG,DUMP Dumps all the TM8/T data into MCC-545C and
clears the TM8/T’s data logger memory so it can
continue to collect new data.
DLOG,CHECK Returns the TM8/T “HEADER” programming
parameters.
DLOG,TIMESET Synchronizes the TM8/T’s date/time clock to
that of the 545’s.