User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 135
COMMAND DESCRIPTION PARAMETERS RANGE
DATE{,mm/dd/yy} Set system date. If no parameters are given,
show current date. If parameters are given, DOS
calendar will also be updated.
mm = month
dd = day
yy = year
1 – 12
1 – 31
0 – 99
DEL MSG,nnnn:sss Delete specified message. nnnn = Station ID
sss = message serial # 1 – 255
*DESTINATION{,nnnn....} Set default message/data destination(s). Enter 0
to use source routing at the Master Station. If
you turn off the 545C’s default destination, no
data will be queued, and the message editor will
ask you to enter a destination before sending a
message. Up to four destinations may be
specified.
nnnn = OFF, 0 or Station ID:
Master = 1 – 245
Remote = 256 – 4095
0 – 4095
*DEVICE{,type} Select device type mode of operation (i.e., the
545C acts as a Remote or a limited Master
Station).
type = REMOTE
MASTER
DG1100 ,COMMAND,{TX} Typical command with Optional transmit to Host
DG1100,DATE Read Current date