User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 131
COMMAND DESCRIPTION PARAMETERS RANGE
†CORPAT,RX,action {,pppp...} Define Receiver correlation patterns to
recognize. Pattern 1 is the default and is the only
pattern recognized if no others specified. Up to
16 pre-defined patterns are recognized.
action =
ON – define patterns
or
OFF
– use only default
pattern
pppp = pattern number;
ALL
means recognize all
patterns
1 – 8
†CORPAT,TX,pppp {,ALWAYS} Define Transmitter correlation pattern to send.
Pattern 1 is the default and is the only pattern
recognized if no other specified. Up to 16 pre-
defined patterns may be used.
pppp = pattern number
ALWAYS
means use specified
pattern instead of received
pattern
1-- 8
CR10X Display CR10X configuration parameters
†CR10X,ACQMODE,mode Set CR10X acquisition mode - Get all reports
since last UPDT
mode =
ALL – get all reports since
last update
CURRENT – get only the
current data report
LAST,n – get last “n” data
reports