User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
128 © 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute.
COMMAND DESCRIPTION PARAMETERS RANGE
CANMSG,nnnn (,msg length
{,min queue depth},{total})
Automatically generate a message of specified
length that repeats until turned off with
CANMSG OFF command. You can compose the
message by entering only the destination name
(not message length or minimum queue depth).
Destination node must be a neighbor node.
CANMSG cannot contain more than 25 messages
in its queue. If the number of canned message in
queue falls below minimum queue depth,
additional canned messages will be injected.
nnnn = Station ID
Master = 1 – 4095
Remote = 256 – 4095
msg length = number of
characters in message
min queue depth = min. # of
canned messages in queue
total = total number of
canned messages to
generate
1 – 4095
1 – 3000
0 – 25
0 – 9999
CANMSG MODE {,mode) Set reception of canned message to two of the
following states:
PRINT – print all messages
NO PRINT – does not print messages
mode = PRINT
NO PRINT