User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
114 © 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute.
16
type/id type/id type/id
type/id
Command: EVENT, GROUP, group-number, bit-name or chan-name, ...
Define an event sensor data (SDATA) report group.
Parameter Description
GROUP
Group control event command.
group-
number
bit-name or
chan-name
Group number to be set by this command. Valid range: 1 through 16.
List of up to 16 discrete and/or analog input signal names to be included in
the group. The values of these signals form the contents of a sensor data
(SDATA) report. They are reported in the order specified in this command.
Append a “/F” to any name for floating point scaling. Append “(x.xx)” for
decimal scaling as: ADC1/F(0.1)
Example: EVENT, GROUP, 1, FPWR/F, ADC1, ADC2/F(1.123)
Command: EVENT, GROUP, DEL, ALL
Delete all group definitions. Clears the group table.
Command: EVENT, GROUP, DEL, group-number
Delete a specific group definition from the group table. This does not cause
the other defined groups to be renumbered.
Parameter Description
GROUP
Group control event command.
DEL
Delete group table sub-command.
group-
number
Group number to be deleted by this command. Valid range: 1 through 16.
Command: EVENT, UPDT, group-number
Produce an immediate SDATA group report when the command is entered.
Parameter Description
UPDT
Update sub-command; i.e., issue a group sensor data (SDATA) report.
group-
number
Group number to be reported in an SDATA report. Valid range: 1 through 16.