User's Manual

545C Operations Manual
02/10/2012 Prerelease DCN 00001789-A
© 2012 Meteorcomm LLC. All Rights Reserved. Proprietary and Confidential. Do Not Distribute. 107
consume one entry in the group table. Some of the commands with “Yes”
are used to free up group table entries. The text table is used to store up
to 40 text messages or operator commands of up to 40 characters each.
There are 8 accumulators, 8 timers and 8 counters that can be used to
facilitate the creation of complex logic.
Table Entry?
Command
Event Group
EVENT
No No
EVENT, DEL,
event number
No No
EVENT, DEL, ALL
No No
EVENT, START
No No
EVENT, STOP
No No
EVENT, RESET, action
Yes No
EVENT, DIOHI, bit-name, settle, holdoff, action
Yes No
EVENT, DIOLOW, bit-name, settle, holdoff, action
Yes No
EVENT, ADCHI, chan-name, hi-level, settle, holdoff, action
Yes No
EVENT, ADCLOW, chan-name, low-level, settle, holdoff, action
Yes No
EVENT, IFGT,
bit
-
name, bit
-
name, action
Yes No
Table Entry?
Command
Event Group
EVENT, IFLT,
bit
-
name, bit
-
name, action
Yes No
EVENT, IFEQ,
bit
-
name, bit
-
name, action
Yes No
EVENT, CONT,
action
Yes No
EVENT, DO,
action
Yes No
EVENT, DISPLAY,
item
-
number
Yes No
EVENT, TEXT
No No
EVENT, TEXT,
item
-
number,
message text
Yes Yes
EVENT, TEXT, DEL, ALL
No No
EVENT, TEXT, DEL,
item
-
number
No No
EVENT, GROUP
No No
EVENT, GROUP, group-number, bit-name or chan-name, …
No Yes
EVENT, GROUP, DEL, ALL
No Yes
EVENT, GROUP, CLEAR, group-number
No Yes
EVENT, UPDT, group-number
No No
EVENT, STATUS,
{
bit
-
name, chan
-
name
}
No No
EVENT, action
No No
SCALE, chan-name, slope, offset
No No
5.6.6 Event Programming Command Details
Command: EVENT