Instruction Manual

OPERATIONS 4-41
MCC-545C PACKET DATA RADIO
12/2000
MCC-545C COMMANDS
COMMAND DESCRIPTION PARAMETERS RANGE
REMCMD
,p,dest1{,…destn}
With the text editor, enter a command to be sent to a
Remote. After entering command, press [ESC] to send
the command.
p = priority
dest1…destn
destination(s)
name = node
name
nnnn = Station
ID
Master = 1 –
245
Remote = 256 –
4095
A – Z, 0 – 9
A – Z, 0 – 9
1 – 4095
REMOTE
STAT{,nnnnn…}
Display transmit/receive statistics for all Remote Stations
or for given IDs (up to 12).
nnnn = Station ID
Master = 1 –
245
Remote = 256 –
4095
1 – 4095
†REMOTE
TYPE{,aaaaa}
Display/set communication characteristics of the unit.
Determines how certain statistics are reported and how
remote commands/messages are framed.
aaaaa =
COMM
DATA
PACKET
*REPEATER{,nnn} Define/display Base Station to which the Repeater site
repeats.
nnn = Base
Station ID
OFF clears a
previously
established
definition
1 – 245
RESET
Perform hardware reset to clear and reinitialize I/O
channels and RF controller. This command retains
previous network configurations and message traffic.