Instruction Manual

OPERATIONS 4-38
MCC-545C PACKET DATA RADIO
12/2000
MCC-545C COMMANDS
COMMAND DESCRIPTION PARAMETERS RANGE
†POLL{interval,offset,
duration,retry}{,ALWAYS
}
Define/display polling schedule for Base/Repeater
Station. If ALWAYS parameter specified, do not
timeout on-line units (i.e., ignore retry count in this case).
interval = polling
interval in
seconds
offset = offset
from top of
minute
duration = length
of poll
retry = retry count
for failed polls
1 – 86400
1 – 59
1 – 10
1 – 99
*POS{,interval,format,
protocol}
Display/initialize internal MCC-545C timing for
reporting GPS position data. Specify update period in
seconds, in either binary or text format, using given
protocol.
interval =
reporting interval
in seconds
format = display
format
protocol = GPS
unit protocol
0 – 65535
BINARY, TEXT
NMEA, ARNAV,
TAIP, TRANSAS
†POS,LOCAL{,interval} Display/initialize timing for local output of position
reports on MNT and DTA ports as well as sending them.
interval =
reporting interval
in seconds; OFF
disables local
output
1 – 86400