Instruction Manual

OPERATIONS 4-35
MCC-545C PACKET DATA RADIO
12/2000
MCC-545C COMMANDS
COMMAND DESCRIPTION PARAMETERS RANGE
MONITOR{action{,nnn
{,nnn,…,nnn}}}
Control monitoring of individual units and print burst
statistics. Overrides MONOFF command and causes
monitor lines to print for each reception from this unit.
action =
ON – enable
OFF – disable
nnn = units to be
monitored
ALL – default
Master = 1 –
245
Remote = 256 -
4095
1 - 4095
MONOFF
Turn off burst monitor
*MSG
Display and delete top operator message in receive queue
when message HOLD is enabled.
NET
Display network routing table for all selected neighbors.
NET – no neighbors
NET1,2 – 1,2, etc. neighbors
NET,all – all neighbors
NET STAT
Display network statistics. Statistics accumulate from
the beginning of each hour and are cleared at the end of
the hour.
NET STAT
PERIOD{,minutes}
Enable display of network statistics and set period
between displays (in minutes). Disable display by setting
period to zero (0).
Minutes =
number of
minutes between
each display
0 - 32767
NEWPASSWORD,old
password, new password
Used to change the password. The NEW PASSWORD
command is used to change the internal stored password.
You must be logged on and know the old password. The
password will automatically be saved.
password = 3-20
character
password
A-Z, 0-9, -