Instruction Manual

ManualsBrandsMeteorcomm ManualsElectronicsMeteor Burst Packet Data Radio For Fixed Or Mobile

OPERATIONS 4-34

MCC-545C PACKET DATA RADIO

12/2000

MCC-545C COMMANDS

COMMAND DESCRIPTION PARAMETERS RANGE

MESSAGE

{,p{,dest1…destn}}

Enter a message with text editor. Message priority and

destination are optional parameters. After entering

message, press [ESC] to queue for transmission. If you

do not enter a destination ID, the MCC-545C

automatically sends your message to its default

destination (set with the DESTINATION command). If

you want to use source rounting, enter 0 for the

destination.

p = priority

dest1. . .destn =

destination(s)

name = node

name

nnnn = Station ID

Master = 1 –

245

Remote = 256 –

4095

A – Z, 0 – 9

1 – 4095

Print current value of RF signal on Receiver

MODE

Print operating mode information.

*MODULATION,degree,

encoding

Set the transmit modulation and data encoding.

IMPORTANT

545C modulation must be the same as other units in the

network.

degree = 90 or 30

encoding = MAN

for Manchester,

DIFF for

differential

†MON{,d{,r}} Turn on burst monitor. Only meteors lasting long

enough to deliver “d” characters will be monitored. If at

least “r” characters were received, a monitor line is

generated.

d = duration

character count

limit

r = received

character count

limit

0 – 32767