Instruction Manual

12
Problem Possible Causes Action Required
Residue leaking from
hub
Contaminated hub due to
food build-up
Technician to remove hub and clean interior.
To avoid problem, always wipe hub and dry after
each use
Attachments touching
bottom or sides of
bowl
Defective or dented bowl Remove dents or replace bowl
Defective attachment Replace attachment
Broken whisk wires
Batch size too large for mixer
Items too firm
Speed too high
Reduce batch size (see Capacity Chart)
Adjust recipe
Reduce speed
Hand utensil dropped into
bowl while mixing
Stop mixer before working on mixture
Broken beater
Ingredients too cold or too
large (e.g. frozen butter/
cream cheese cut in chunks)
Wait for ingredient to reach room temperature
before mixing
Reduce chunk size
Broken dough hook
Batch size too large for mixer
Reduce batch size (see Capacity Chart)
Adjust recipe
Ingredients too cold or too
large
Wait for ingredients to reach room temperature
before mixing
Reduce chunk size
Discoloration of mixed
product
Bowl has not been cleaned
thoroughly
Clean bowl again (refer to page
10)