Instruction Manual

10
Cleaning Instructions
ALWAYS disconnect from the power source when cleaning or servicing this machine.
ALWAYS remove the attachment/s after each batch. If not, the attachment/s can become stuck
on the shaft and difficult to remove.
NEVER attempt to clean this machine while it is in motion, serious injury could result.
NEVER use a scrubber pad, steel wool, or abrasive material to clean the mixer.
NEVER use bleach or bleach based cleaner.
Recommended Cleaning
Part Required Action Frequency
Attachments Hand wash using soap and water, rinse, dry and sanitise. Clean after each use
Guard Hand wash using soap and water, rinse, dry and sanitise. When required
Bowl
Using a sponge or cloth, soap and water, apply pressure
to ensure the bowl is clean, rinse, dry and sanitise. The
bowl can also be placed in a dishwasher
Clean after each use
Solid Bowl Guard Hand wash using soap and water, rinse, dry and sanitise. Clean after each use
Bowl Cradle Hand wash using soap and water, rinse, dry and sanitise. Daily
Planetary Shaft Wipe with a clean damp cloth, dry & sanitise. Clean after each use
Exterior Hand wash using soap and water, rinse, dry and sanitise. Daily
Hub Interior Wipe with clean damp cloth, dry & sanitise. Daily
Maintenance
Regular maintenance is necessary on all mixers if they are to run smoothly and problem free.
Part Required Action Frequency
Planetary Ring
Reapply grease. Inject grease (2 pumps only) into fitting on
the side of planetary housing.
DO NOT overfill
Once a year.
Bowl Slide Rods
Apply food quality grease on the bowl slide rods. Raise and
lower the bowl to distribute the grease onto the rods.
If the bowl becomes
difficult to raise or
lower.