Datasheet
www.okinternational.com‐www.metcal.com Page|1
CVC Cartridges are compatible with MX-500, MX-5000, MX-5200 and CV-5200, CV-500 Systems -
MX-RM3E, MX-RM6E, MX-H1-AV, MX-H7-SF, CV-H1-AV and CV-H7-AV Solder Hand pieces.
STTC Cartridges are compatible with MX-500, MX-5000 and MX-5200 Systems - MX-RM3E,
MX-RM6E, MX-H1-AV and MX-H7-SF Solder Hand pieces.
Temperature CV-Serie MX-Serie Application
302 °C CVC-5xxx STTC-5xx
Temperature Sensitive
357 °C CVC-6xxx STTC-0xx
413 °C CVC-7xxx STTC-1xx Most Standard
468 °C CVC-8xxx STTC-8xxV1
Ceramic and High Thermal Demand
496 °C CVC-9xxx STTC-8xx
Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry of the cartridge
(up to 15 ˚C lower.)
Bevel Cartridges
CVC-5BV6005A
STTC-546
Long reach,
(Bevel/L) 60° x 1 mm,
(ø x L) 0.50 x 14.2 mm
CVC-6BV6005A
STTC-046
CVC-7BV6005A
STTC-146
CVC-8BV6005A
STTC-846V1
CVC-9BV6005A
STTC-846
CVC-5BV6018P
STTC-547P
(Bevel/L) 60° x 1.78 mm,
optimised geometry for best
thermal performance
(ø x L) 0.83 x 6.4 mm
CVC-6BV6018P
STTC-047P
CVC-7BV6018P
STTC-147P
CVC-8BV6018P
STTC-847PV1
CVC-9BV6018P
STTC-847P
CVC-5BV6018R
STTC-547
Long reach,
(Bevel/L 60°) x 1.78 mm,
(ø x L) 0.83 x 14.2 mm
CVC-6BV6018R
STTC-047
CVC-7BV6018R
STTC-147
CVC-8BV6018R
STTC-847V1
CVC-9BV6018R
STTC-847
CVC-5BV4001S
STTC-524
(Bevel/L) 30° x 1.49 mm,
(ø x L) 1.23 x 9.3 mm
CVC-6BV4001S
STTC-024
CVC-7BV4001S
STTC-124
CVC-8BV4001S
STTC-824V1
CVC-9BV4001S
STTC-824
CVC-5BV3018P
STTC-515
(Bevel/L 30°) x 1.47 mm,
optimised geometry for best
thermal performance,
(ø x L) 1.3 x 3.9 mm
CVC-6BV3018P
STTC-015
CVC-7BV3018P
STTC-115
CVC-8BV3018P
STTC-815V1
CVC-9BV3018P
STTC-815
CVC-5BV6018S
STTC-535
(Bevel/L) 30° x 2.06 mm,
(ø x L) 1.78 x 9.9 mm
CVC-6BV6018S
STTC-035
CVC-7BV6018S
STTC-135
CVC-8BV6018S
STTC-835V1
CVC-9BV6018S
STTC-835
CVC-5BV3018S
STTC-505
(Bevel/L) 30° x 2.06 mm,
(ø x L) 1.78 x 11.7 mm
CVC-6BV3018S
STTC-005
CVC-7BV3018S
STTC-105
CVC-8BV3018S
STTC-805V1
CVC-9BV3018S
STTC-805
14,2 mm
1 mm
Ø0.83mm
Ø0.83
mm