Datasheet

   www.okinternational.com‐www.metcal.com    Page|13

HCV Cartridges for High Thermal Demand applications with increased heating elements are compatible
with MX-500, MX-5000, MX-5200 and CV-5200, CV-500 Systems MX-H6-HTD, CV-H6-HTD,
CV-H7-HTD Solder Hand pieces.
HTC Cartridges for High Thermal Demand applications are compatible with MX-500,
MX-5000 and MX-5200 Systems – MX-H6-HTD Solder Hand pieces.

Temperature CV-Serie
MX-Serie
Application
413 °C HCV-7 HTC-7 Most Standard
468 °C HCV-8 HTC-8
Ceramic and High Thermal Demand
496 °C HCV-9 HTC-9
Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry of the cartridge
(up to 15 ˚C lower.)

For high mass application
Chisel,
(W x L) 1.5 x 10.4 mm
HCV-7CH0015S
HCV-8CH0015S
HCV-9CH0015S

Chisel,
(W x L) 1.8 x 10 mm
HCV-7CH0018S
HCV-8CH0018S
HCV-9CH0018S

Conical,
(ø x L) 2 x 8.3 mm
HCV-7CN0020S HTC-7CN0020S
HCV-8CN0020S HTC-8CN0020S
HCV-9CN0020S HTC-9CN0020S

V-Groove Chisel for pin soldering,
Grove (W x L) 1.0 x 4 mm,
(W x L) 5.3 x 8.3 mm
HCV-7VG0053S HTC-7VC0053S
HCV-8VG0053S HTC-8VC0053S
HCV-9VG0053S HTC-9VC0053S

Chisel,
(W x L) 2.5 x 8 mm
HCV-7CH0025S HTC-7CH0025S
HCV-8CH0025S HTC-8CH0025S
HCV-9CH0025S HTC-9CH0025S

Chisel,
(W x L) 5.3 x 8.3 mm
HCV-7CH0053S HTC-7CH0053S
HCV-8CH0053S HTC-8CH0053S
HCV-9CH0053S HTC-9CH0053S
