Datasheet

6
MX-500 Dual Switchable Output
Soldering, Desoldering & Rework Systems
NOTE: Additional Hand-pieces and Upgrade Kits are available, see pages 7 and 8
Metcal’s MX-500 Soldering and Rework System has been reimagined, adding features and a new look to a
bench top icon. The system utilizes SmartHeat® Technology, where each cartridge is equipped with a self-
regulating heater which ‘senses’ its own temperature and closely maintains its pre-set idle temperature for
the life of the heater-tip. The tip temperature is determined by the inherent metallurgical properties of the
heater; no external adjustment or equipment is required. The MX-500 retains switchable dual port, 40W
operation while introducing numerous new features in a new housing.
SYSTEM WITH ONE HAND-PIECE SYSTEMS WITH TWO HAND-PIECES
POWER SUPPLY WITH NO HAND-PIECE
Key Features &Benefits
w A built in Net Power Meter which will display a graphical
and numerical representation of the power applied to the
cartridge.
w User Programmable PowerSave Mode: the time to
enter PowerSave Mode is adjustable from 10 to 120
minutes.
w Ground Fault Interrupt: AC ground monitor detects
power line ground failures and immediately alerts the
operator and shuts down the system. Only after the
power line has been restored, can the MX-500 be
restarted and soldering operations can be resumed.
w Universal Power Supply: automatically senses the input
line voltage and adjusts accordingly, which allows for
worldwide operation without adaptors or a change in
performance.
w Full compatibility with existing and previous MX upgrade
kits, tip-cartridges, hand-pieces and accessories.
w Greater process control with SmartHeat® Technology
w Reduced space requirements
MX-500SPT Rework System
Includes: Power supply, MX-PTZ
precision tweezer hand-piece with
MX-W4PT TipSaver workstand and
MX-RM3E soldering and rework hand-piece
and WS1 sleeper workstand.
Tweezer cartridges:
PTTC Series.
Soldering Cartridges:
STTC and SMTC Series
MX-500DS Desoldering System
Includes: Power supply, MX-DS1
desoldering hand-piece with MX-W5DS
TipSaver workstand and MX-RM3E
soldering and rework hand-piece and WS1
sleeper workstand
Desoldering cartridges:
STDC Series
Soldering cartridges:
STTC and SMTC Series.
NOTE: Unit requires shop air for desoldering.
MX-500S Soldering / Rework System
Includes: Power supply, MX-RM3E
soldering and rework hand-piece and
WS1 sleeper workstand
Soldering cartridges:
STTC Series and SMTC Series
MX-500P
MX-500 dual port switchable
power supply
www.metcal.com
www.metcal.com
MX-500 System configuration with MX-H2-UF hand-piece coming soon.
Check www.metcal.com for more details.
EAP Cat v2 2013 Oct17_Layout 1 30/10/2013 16:57 Page 6